Appendices
A-34
NJ-series CPU Unit Hardware User’s Manual (W500)
CJ1W-OD202 Transistor Output Unit (8 Points)
Name 8-point Transistor Output Unit with Terminal Block (Sourcing Outputs)
Model CJ1W-OD202
Rated Voltage 24 VDC
Operating Load Voltage Range 20.4 to 26.4 VDC
Maximum Load Current 2 A/point, 8 A/Unit
Leakage Current 0.1 mA max.
Residual Voltage 1.5 V max.
ON Response Time 0.5 ms max.
OFF Response Time 1.0 ms max.
Load Short-circuit Protection
Detection current: 6 A min.
Automatic restart after error clearance. (Refer to page A-95.)
Line Disconnection Detection Detection current: 200 mA (Refer to page A-95.)
Insulation Resistance 20 M between the external terminals and the GR terminal (100 VDC)
Dielectric Strength
1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current
of 10 mA max.
Number of Circuits 8 (4 points/common, 2 circuits)
Internal Current Consumption 110 mA max.
Fuse None
External Power Supply 24 VDC, 50 mA min.
Weight 120 g max.
Circuit Configuration
• When an overcurrent or line disconnection is detected, the ERR indicator will light. At the same
time, the corresponding bit (two points per bit) in the Basic I/O Unit Information Area system-
defined variable will change to TRUE.
COM0 (+V)
COM1 (+V)
to
to
Output indicator
ERR indicator
Internal circuits
Signal name
Jxx_Ch1_Out03
Jxx_Ch1_Out00
0 V
Jxx_Ch1_Out04
Jxx_Ch1_Out07
0 V
Short-circuit
protection
Short-circuit
protection
To Next Page
Loading...
