Omron NJ301-1200 - Instruction Error Table

3 Error Tables
3-140
NJ-series Troubleshooting Manual (W503)
3-3 Instruction Error Table
For descriptions of the error codes for the motion control instructions and other instructions, refer to the
descriptions of the corresponding event codes. Events that occur for motion control instructions are
given in 3-1-3 Errors in the Motion Control Function Module. Events that occur for other instructions are
given in 3-1-2 Errors in the PLC Function Module. Refer to 1-3-1 Types of Non-fatal Errors for the rela-
tionship between event codes and error codes.