Omron NS10-TV00 V2 Series

Programmable Terminals
NS-Series
NS12-TS00@-V1/-V2, NS12-TS01@-V1/-V2
NS10-TV00@-V1/-V2, NS10-TV01@-V1/-V2
NS8-TV00
@
-V1/-V2, NS8-TV01
@
-V1/-V2
NS8-TV10@-V1, NS8-TV11@-V1
NS5-SQ00@-V1/-V2, NS5-SQ01@-V1/-V2,
NS5-TQ00@-V2, NS5-TQ01@-V2,
NS5-MQ00@-
V
2
,
NS5-MQ01@-
V
2
SETUP MANUAL
Cat. No. V083-E1-06

Omron NS10-TV00 V2 Series Specifications

General

Touch Type	Analog Resistive
Power Supply	24 VDC
Memory (RAM)	128 MB
Backlight	LED
Brightness	400 cd/m²
Backlight Life	50, 000 hours
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Humidity	10 to 90% RH (non-condensing)
Display Type	TFT LCD
Display Size	10.4 inches
Communication Ports	RS-232C, Ethernet, USB
CPU	RISC processor
Vibration Resistance	10 to 57 Hz: 0.075 mm amplitude
Protection Rating	IP65 (front panel)

Summary

Section 3 Installing the PT and Connecting Peripheral Devices

Installing the PT

Methods for mounting the PT to control panels and connecting power.

Starting the PT

Procedures for starting the PT and its operation at startup.

Connecting the CX-Designer

Methods for connecting the PT to a computer for screen data transfer.

Connecting to Bar Code Readers

Instructions for connecting and setting up bar code readers.

Using Memory Cards

Information on using memory cards for data storage and transfer.

Installing the Video Input Unit

Guide for mounting and connecting the Video Input Unit.

Installing the Controller Link Interface Unit

Guide for mounting and wiring the Controller Link Interface Unit.

Section 4 Connecting the Host to Serial Port

1:1 Host Connection

Methods for connecting a single host to a serial port.

1:N Host Connection

Methods for connecting multiple PTs to a single host.

High-speed 1:N NT Link

Details on high-speed 1:N NT Link connections.

Section 5 Connecting to Host via Ethernet or Controller Link

Connecting to Host Via Ethernet

Methods for connecting the PT to a host using Ethernet.

Connecting to the Host Using Controller Link

How to connect the PT to a host using a Controller Link Interface Unit.

Section 6 System Menu Operations

Initializing and Saving Data and Removing the Memory Card

PT Settings

Communications Settings

Special Screens

Section 7 Maintenance and Troubleshooting

Maintenance

Troubleshooting and Maintenance

Measures to take when errors occur during operation or data transfer.