Omron NS5-MQ00 V2 Series User Manual

Programmable Terminals
NS-Series
NS12-TS00@-V1/-V2, NS12-TS01@-V1/-V2
NS10-TV00@-V1/-V2, NS10-TV01@-V1/-V2
NS8-TV00
@
-V1/-V2, NS8-TV01
@
-V1/-V2
NS8-TV10@-V1, NS8-TV11@-V1
NS5-SQ00@-V1/-V2, NS5-SQ01@-V1/-V2,
NS5-TQ00@-V2, NS5-TQ01@-V2,
NS5-MQ00@-
V
2
,
NS5-MQ01@-
V
2
SETUP MANUAL
Cat. No. V083-E1-06

Omron NS5-MQ00 V2 Series Specifications

General

Display Size	5.7 inches
Display Type	TFT Color LCD
Touch Type	Analog Resistive
Power Supply	24 VDC
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 60 °C
Resolution	320 x 240 pixels
Communication Ports	RS-232C, USB
Protection Rating	IP65 (front panel)

Summary

Section 1 Overview

1-1 NS-series PT Functions and Operation

Describes the role and functions of NS-series PTs for first-time users.

1-2 Communications with the Host

Details how NS-series PTs allow communication with PLCs using NT Link, Ethernet, Controller Link, and Host Link.

1-4 Procedure for Running NS-series PTs

Section 2 Before Connecting

2-1 Connecting the Host

Explains the networks for hosts usable with NS-series PTs, including ports and connection methods.

Section 3 Installing the PT and Connecting Peripheral Devices

3-1 Installing the PT

Covers installation environment, mounting, power supply connection, and grounding.

3-2 Starting the PT

Describes the PT's operation at startup and the procedure for the first-time startup.

3-3 Connecting the CX-Designer

Details connecting the PT to a computer using RS-232C, Ethernet, USB, or modem.

3-6 Using Memory Cards

3-8 Installing the Controller Link Interface Unit

Section 4 Connecting the Host to Serial Port

4-1 1:1 Host Connection

Methods for connecting the host to serial port A or B using RS-232C or RS-422A.

4-2 1:N Host Connection

Methods to connect multiple PTs to a single host in a 1:N configuration.

4-3 High-speed 1:N NT Link

Section 5 Connecting to Host via Ethernet or Controller Link

5-1 Connecting to Host Via Ethernet

How to connect the PT to the network using the Ethernet interface, including IP address configuration.

5-2 Connecting to the Host Using Controller Link

Method for connecting the PT to the host using a Controller Link Interface Unit and setting data links.

Section 6 System Menu Operations

6-1 Operating Modes and System Menu

Overview of PT operating modes and the System Menu configuration and items.

6-2 Initializing and Saving Data and Removing the Memory Card

6-3 PT Settings

6-6 Communications Settings

How to set up communications conditions for serial ports, Ethernet, Controller Link, and Bar Code Readers.

6-8 Special Screens

6-9 Hardware Check

6-10 Starting Operations

Section 7 Maintenance and Troubleshooting

7-1 Maintenance

General maintenance operations, backing up data, and replacing the backlight.

7-3 Troubleshooting and Maintenance

Troubleshooting common errors during data transfer, PT startup, operation, and connection.

Appendices

Appendix 1 Specifications

Appendix 8 Standard Models