Omron NS5-SQ00 V2 Series User Manual

Programmable Terminals
NS-Series
NS12-TS00@-V1/-V2, NS12-TS01@-V1/-V2
NS10-TV00@-V1/-V2, NS10-TV01@-V1/-V2
NS8-TV00
@
-V1/-V2, NS8-TV01
@
-V1/-V2
NS8-TV10@-V1, NS8-TV11@-V1
NS5-SQ00@-V1/-V2, NS5-SQ01@-V1/-V2,
NS5-TQ00@-V2, NS5-TQ01@-V2,
NS5-MQ00@-
V
2
,
NS5-MQ01@-
V
2
SETUP MANUAL
Cat. No. V083-E1-06

Omron NS5-SQ00 V2 Series Specifications

General

Display Size	5.7 inches
Resolution	320 x 240 pixels
Touchscreen Type	Analog Resistive
Backlight	LED
Brightness	300 cd/m²
Backlight Life	50, 000 hours
Power Supply	24 VDC
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 60 °C
Humidity	10 to 90% RH (non-condensing)
Display Type	TFT color LCD
Communication Ports	RS-232C, RS-422/485
Vibration Resistance	10 to 57 Hz, 0.075 mm amplitude, 57 to 150 Hz, 9.8 m/s²
Shock Resistance	147 m/s² (15 G)
Protection Rating	IP65
Weight	0.8 kg

Summary

NS-Series Programmable Terminals

Section 1 Overview

NS-series PT Functions and Operation

Communications with the Host

Details various methods for NS-series PTs to communicate with a host system.

System Configuration

Procedure for Running NS-series PTs

Section 2 Before Connecting

Connecting the Host

Provides details on networks and connection methods for hosts used with NS-series PTs.

Section 3 Installing the PT and Connecting Peripheral Devices

Installing the PT

Details the methods for mounting the PT to a control panel and connecting power.

Starting the PT

Connecting the CX-Designer

Describes how to connect the PT to a computer using RS-232C, Ethernet, or USB.

Using Memory Cards

Section 4 Connecting the Host to Serial Port

1:1 Host Connection

Details connection methods and unit settings for a 1:1 host connection via serial port.

1:N Host Connection

Explains connection methods and unit settings for connecting multiple PTs to one host.

High-speed 1:N NT Link

Section 5 Connecting to Host via Ethernet or Controller Link

Connecting to Host Via Ethernet

Details connection methods, network configuration, and host settings for Ethernet.

Connecting to the Host Using Controller Link

Explains the Controller Link network and data link setup for host connections.

Section 6 System Menu Operations

Operating Modes and System Menu

Initializing and Saving Data and Removing the Memory Card

PT Settings

Project Settings

Setting Passwords

Explains how to set and change passwords for functional object operations.

Communications Settings

Details how to configure communications conditions for serial ports, Ethernet, and Controller Link.

Special Screens

Hardware Check

Starting Operations

Section 7 Maintenance and Troubleshooting

Maintenance

Covers essential maintenance operations like backing up data and replacing the battery.

Troubleshooting and Maintenance

Lists common errors during data transfer, PT startup, and operation with corresponding measures.