Omron NS12-TS01 V2 Series User Manual

Programmable Terminals
NS-Series
NS12-TS00@-V1/-V2, NS12-TS01@-V1/-V2
NS10-TV00@-V1/-V2, NS10-TV01@-V1/-V2
NS8-TV00
@
-V1/-V2, NS8-TV01
@
-V1/-V2
NS8-TV10@-V1, NS8-TV11@-V1
NS5-SQ00@-V1/-V2, NS5-SQ01@-V1/-V2,
NS5-TQ00@-V2, NS5-TQ01@-V2,
NS5-MQ00@-
V
2
,
NS5-MQ01@-
V
2
SETUP MANUAL
Cat. No. V083-E1-06

Omron NS12-TS01 V2 Series Specifications

General

Display Type	TFT LCD
Display Size	12.1 inches
Resolution	800 x 600 pixels
Touchscreen Type	Analog resistive
Brightness	400 cd/m²
Backlight Life	50, 000 hours
Power Supply	24 VDC
Operating Temperature	0 to 50 °C
Humidity	10% to 90% (non-condensing)
Flash Memory	128 MB
Communication Ports	Ethernet, USB, RS-232, RS-485
Storage Temperature	-20 to 60°C
Vibration Resistance	10 to 57 Hz
Shock Resistance	15 G
Protection Rating	IP65 (front panel)
Certifications	CE, UL, cUL

Summary

Section 1 Overview

1-1 NS-series PT Functions and Operation

Outlines the basic functions and operational capabilities of NS-series PTs.

1-2 Communications with the Host

Details the various communication methods supported by NS-series PTs.

Section 2 Before Connecting

2-1 Connecting the Host

Provides details on networks for hosts that can be used with NS-series PTs.

Section 3 Installing the PT and Connecting Peripheral Devices

3-1 Installing the PT

Details the methods for mounting the PT to a control panel and connecting power supply.

3-2 Starting the PT

Explains the procedure for powering on and starting the PT, including startup operations.

3-3 Connecting the CX-Designer

Guides on connecting the PT to a computer using CX-Designer via RS-232C, Ethernet, or USB.

3-6 Using Memory Cards

Section 4 Connecting the Host to Serial Port

4-1 1:1 Host Connection

Describes methods for connecting the host to the serial port using RS-232C or RS-422A.

4-2 1:N Host Connection

Details methods for connecting multiple PTs to a single host in a 1:N configuration.

4-3 High-speed 1:N NT Link

Section 5 Connecting to Host via Ethernet or Controller Link

5-1 Connecting to Host Via Ethernet

Details methods for connecting the PT to the host using the Ethernet interface.

5-2 Connecting to the Host Using Controller Link

Explains how to connect the PT to the host using a Controller Link Interface Unit.

Section 6 System Menu Operations

6-1 Operating Modes and System Menu

6-2 Initializing and Saving Data and Removing the Memory Card

6-3 PT Settings

6-4 Project Settings

6-6 Communications Settings

Guides on setting communications conditions for serial ports, Ethernet, and Controller Link.

6-8 Special Screens

6-9 Hardware Check

6-10 Starting Operations

Section 7 Maintenance and Troubleshooting

7-1 Maintenance

Covers regular maintenance operations like backing up data and replacing the battery.

7-3 Troubleshooting and Maintenance

Offers solutions for common errors during data transfer, PT startup, and operation.