6-2 Initializing and Saving Data and Removing the Memory Card
6-2-6 Language Selection
The system language can be set to either Japanese or English. The system language will be
used on the system menu, input keypads, message dialog boxes, etc, on the PT.
The system language is set from the Initialize Tab Page in the System Menu Window using
the following procedure.
1. Select either Japanese or English in the Select Language Area.
2. After specifying the language, click the Write Button. The system language will be
switched after the new setting has been saved.
Reference If ASCII codes are set as the character display format for String Display & INPUT, list
display, or data block tables (character fields), the following character codes will be
used depending on the system language that is set.
System Language Character display Example
(character code B5)
Japanese Shift-JIS code
English Latin 1code µ
The above codes will also be used when indirect specifications are made for label
strings for label objects.
6-16
To Next Page
Loading...
