Omron NS8-TV10 V1 Series - Memory Link Connections; Communicating with Another Companys Plcs

1-2 Communications with the Host
1-2-6 Memory Link Connections
When the host is a computer instead of a PLC, the Memory Link protocol can be used to
connect with the computer. Use serial port A or B to connect to the host. For details, refer to
the Host Connection Manual (Tem.Control, MemLink).
1-2-7 Communicating with Another Company’s PLCs
The NS-series PTs can communicate with the following PLCs.
•
•
Mitsubishi FX-series/A-series PLCs
Siemens S7-300-series PLCs
For details on connection methods, refer to the Host Connection Manual (Multivendor Con-
nection).
1-7