Omron NS8-TV10 V1 Series User Manual

3-8 Installing the Controller Link Interface Unit
● Connecting the Cable
Connect the functional ground terminal of the PT and the cover with the cable to prevent mal-
function due to noise.
Connect with the cable provided.
● Removing Controller Link Interface Unit
1. Remove the cover.
Remove these screws and
remove the cover.
Cover
Controller Link
Support
Board
3-47

Omron NS8-TV10 V1 Series Specifications

General

Brand	Omron
Model	NS8-TV10 V1 Series
Category	Touch terminals
Language	English