6-5SectionOperations in the System Installer Mode
118
Initialize the recipe tables by following the menu operations from the Mainte-
nance Mode Menu as shown below.
Select Memory Init..
Select Recipe Table.
Select Y
es.
The recipe tables are initialized. During ini-
tialization, the message Initializing is dis-
played.
If
No is selected, the NT21 returns to the MEMOR
Y INIT
. MENU screen without
initializing the recipe tables.
On
completion of memory table initialization,
the message Finished is displayed
and the NT21 returns to the MEMORY INIT. MENU screen.
6-5 Operations in the System Installer Mode
The following functions can be executed in the System Installer mode:
• Clearing/installing the system program (page 119)
• Disabling/enabling
display of the System
Menu (changing the system settings)
(page 120)
• Disabling/enabling writing to the screen data memory (changing the system
settings) (page 120)
• Clearing screen data (page 121)
6-5-1 Calling the System Installer Mode
If the NT21 has no system program installed, or if the system program is cor-
rupted,
the
System Installer mode is automatically established when the power
is switched ON.
To Next Page
Loading...
Need help?
General
