6-4SectionMemory Initialization
116
6-4-5 Initializing the Memory Switches
Initialization
returns all the memory switches of the NT21 to their status on ship
-
ment.
Initialize
the memory
switches by following the menu operations from the Main
-
tenance Mode Menu as shown below.
Select Memory Init..
Select Memory Switch.
Select Y
es.
The
memory tables are initialized. During ini
-
tialization, the message Initializing is dis-
played.
If
No is selected, the NT21 returns to the MEMOR
Y INIT
. MENU screen without
initializing the memory switches.
On completion of memory switch initialization, the message Finished is dis-
played and the NT21 returns to the MEMORY INIT. MENU screen.
To Next Page
Loading...
Need help?
General
