6-10SectionSetting the Bar Code Reader Input Function
145
Press [↓] (next screen) or [↑] (previous
screen)
to display the fourth memory
switch
setting screen.
Press Comm. A Method to select Bar-Code
Reader.
The setting option changes each time the
touch switch is pressed.
Press the Set touch switch to the right of
Comm. A Method.
Display the required setting for each item by
pressing the touch switches.
The setting option changes each time the
touch switch is pressed.
Press Quit.
Pressing Abort on the communication condition/confirmation method setting
screen
causes the NT21 to return to the memory switch setting screen (4/4) with
-
out executing setting (with the previous settings still effective).
On completion of communication condition/confirmation method setting, the
NT21 returns to the memory switch setting screen (4/4).
To Next Page
Loading...
Need help?
General
