10 - 1
10
NX-series Position Interface Units User’s Manual (W524)
There are several different ways to check for errors in the Position Interface Units.
When an error occurs, refer to this section for detailed information on errors and how to
correct them.
10-1 Checking for Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
10-2 Checking for Errors with the Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
10-3 Checking for Errors and Troubleshooting on the Sysmac Studio . . . . . 10-5
10-3-1 Checking for Errors from the Sysmac Studio . . . . . . . . . . . . . . . . . . . . . . . . . 10-5
10-3-2 Event Codes for Errors and Troubleshooting Procedures . . . . . . . . . . . . . . . 10-6
10-4 Resetting Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-24
10-5 Unit-specific Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-25
10-5-1 Incremental Encoder Input Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-25
10-5-2 SSI Input Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-27
10-5-3 Pulse Output Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-28
10-6 Troubleshooting Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-30
Troubleshooting
To Next Page
Loading...
