Unit Versions
26
NX-series Position Interface Units User’s Manual (W524)
• Unit model number
• Unit version
• Serial number
• Lot number
• Hardware version
• Software version
• Total power-ON time
The software version is displayed only for Units that contain software.
The total power-ON time is provided by function to monitor the total power-ON time. The func-
tion to monitor the total power-ON time was added for a version upgrade. Refer to Functions
That Were Added or Changed for Each Unit Version on page A-67 for the unit versions that
support monitoring the total power-ON time.
The functions that are supported depend on the unit version of the Unit. The version of Sysmac Studio
that supports the functions that were added for an upgrade is also required to use those functions.
Refer to A-5 Version Information on page A-65 for the functions that are supported by each unit version.
Unit Versions and Sysmac Studio Versions
To Next Page
Loading...
