Omron NX-EC0112 User Manual

Appendices
A - 68
NX-series Position Interface Units User’s Manual (W524)
*1. Some Units do not have all of the versions given in the above table. If a Unit does not have the specified ver-
sion, support is provided by the oldest available version after the specified version. Refer to the user’s manu-
als for the specific Units for the relation between models and versions.
*2. Refer to the NX-series EtherCAT Coupler Unit User’s Manual (Cat. No. W519-E1-03 or later) for information
on how to restart a specified NX Unit.
*3. A CPU Unit with unit version 1.07 or later is required to specify an NX Unit for the restart instruction. If you do
not specify an NX Unit for the restart instruction, you can use version 1.05. Refer to the NJ/NX-series Instruc-
tions Reference Manual (Cat. No. W502) for information on specifying an NX Unit for the restart instruction.
*4. Refer to the NX-series EtherCAT Coupler Unit User’s Manual (Cat. No. W519-E1-03 or later) for information
on monitoring the total power-ON time.

Omron NX-EC0112 Specifications

General

Brand	Omron
Model	NX-EC0112
Category	Controller
Language	English