Omron NX-OD5256 User Manual

9 - 15
9 Troubleshooting
NX-series Digital I/O Unit User’s Manual (W521)
9-3 Checking for Errors and Troubleshooting on the Sysmac Studio
9
9-3-3 Meaning of Error
Event name Event Log Cleared Event code 90400000 hex
Meaning The event log was cleared.
Source Depends on where the Sysmac
Studio is connected and the sys-
tem configuration.
Source details NX Unit Detection
timing
When
commanded
from user
Error
attributes
Level Information Recovery --- Log category Access
Effects User program Continues. Operation Not affected.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The event log was cleared by the
user.
--- ---
Attached
information
Attached information: Events that were cleared
1: The system event log was cleared.
2: The access event log was cleared.
Precautions/
Remarks
None

Omron NX-OD5256 Specifications

General

Brand	Omron
Model	NX-OD5256
Category	I/O Systems
Language	English