7 Digital Output Units
7 - 8
NX-series Digital I/O Unit User’s Manual (W521)
7-3 List of Settings
The followings are the setting descriptions, setting ranges, and default values of the functions that can
be used in the Digital Output Units.
The settings are reflected after the Unit is restarted.
The Unit is required to restart after the transfer of Unit operation settings on the Sysmac Studio
is completed. Always sufficiently check the safety at the connected devices before you transfer
the Unit operation settings.
Two-point Output Units
Four-point Output Units
NX Units in Free-Run Refreshing or Synchronous I/O Refreshing
Setting name Description
Default
value
Setting
range
Unit Index
Subin-
dex
Refer-
ence
Load Rejection Output
for Output Bit 00
Set the output at load
OFF.
FALSE: OFF
TRUE: Hold the present
value.
FALSE TRUE or
FALSE
5010
hex
01 hex P. 7-12
Load Rejection Output
for Output Bit 01
FALSE TRUE or
FALSE
02 hex
Setting name Description
Default
value
Setting
range
Unit Index
Subin-
dex
Refer-
ence
Load Rejection Output
for Output Bit 00
Set the output at load
OFF.
FALSE: OFF
TRUE: Hold the present
value.
FALSE TRUE or
FALSE
5010
hex
01 hex P. 7-12
Load Rejection Output
for Output Bit 01
FALSE TRUE or
FALSE
02 hex
Load Rejection Output
for Output Bit 02
FALSE TRUE or
FALSE
03 hex
Load Rejection Output
for Output Bit 03
FALSE TRUE or
FALSE
04 hex