Need help?Do you have a question about the Omron W4S1-0 Series and is the answer not in the manual?
General| Category | I/O Systems |
|---|---|
| Series | W4S1-0 |
| Input Voltage | 24 VDC |
| Output Voltage | 24 VDC |
| Input Current | 7 mA |
| Operating Temperature | -10 to 55°C |
| Storage Temperature | -25 to 65°C |
| Output Current | 0.5 A |
Lists the Omron devices used, including Ethernet switch, Safety CPU unit, Communication Control unit, and Safety I/O block.
Details the system configuration, showing a diagram and listing components like PC, Sysmac Studio, switch, and safety I/O block with their models and versions.
Guides on setting up the safety controller, emphasizing Sysmac Studio installation and preparation.
Details how to configure hardware and set IP addresses using rotary switches on the controller, with precautions.
Step-by-step instructions for launching Sysmac Studio, connecting to the safety controller, and establishing an online connection.
Explains how to create and verify the unit configuration within Sysmac Studio by comparing it with the actual hardware setup.
Details how to set up EtherNet/IP safety connections between the safety controller and the I/O block using Sysmac Studio.
Guides on setting global variables for the safety controller, including how to use the I/O Map and create device variables.
Explains how to transfer safety application data to the safety network controller using Sysmac Studio's synchronize and transfer functions.
Details the process of transferring the safety program to the safety CPU unit via Sysmac Studio, including mode changes.
To Next Page
