Omron NX Series Network Connection Guide

37
10 Programming Using IO-Link
27
Right-click the bottommost variable in the list of global variables, and click Create New.
28
Set the following variable name and data type.
Variable name: SLC_Error_Code
Data type: ARRAY[0..255] OF BYTE
29
Select Programming in the Multiview
Explorer.
30
Set the I/O of the IOL_ReadObj block as follows.
Click Enter Function Block, and enter the following instance variable name.
Instance variable name: ReadError
DevicePort: DevicePort
DeviceObj: DeviceObject
ReadDat: SLC_Error_Code
31
Select Project - Build Controller.

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model