Thank you for choosing this OMNUC U-series UE models product. Proper use
and handling of the product will ensure proper product performance, lengthen
product life, and may prevent possible accidents.
Please
read this manual thoroughly and handle and operate the product with care.
General Instructions
1. Refer to Precautions first and carefully read and be sure to understand the information provided.
2. Familiarize
yourself with this manual and understand the functions and performance of the Servo
-
motor and Servo Driver for proper use.
3. The
Servomotor and Servo Driver must be wired and the Parameter Unit must be operated by ex
-
perts in electrical engineering.
4. We
recommend that you
add the following precautions to any instruction manuals you prepare for
the system into which the product is being installed.
S Precautions on the dangers of high-voltage equipment.
S Precautions
on touching the terminals of the product even
after power has been turned of
f. (These
terminals are live even with the power turned off.)
5. Do
not perform withstand voltage
or other megameter tests on the product. Doing so may damage
internal components.
6. Servomotors
and Servo Drivers have a finite service life. Be sure to keep replacement products on
hand and to consider the operating environment and other conditions affecting the service life.
7. Do
not set
any parameter not described in this manual, otherwise the Servomotor or Servo Driver
may malfunction. Contact your OMRON representatives if you have any inquiry.
NOTICE
Before using the product under the following conditions, consult your OMRON
representatives,
make sure that the ratings
and performance characteristics of the product are
good
enough for the systems, machines,
or equipment, and be sure to provide the systems,
machines, or equipment with double safety mechanisms.
1. Conditions not described in the manual.
2. The application of the product to nuclear control systems, railroad systems, aviation systems, ve-
hicles, combustion systems, medical equipment, amusement machines, or safety equipment.
3. The
application of the product to systems, machines, or equipment that may have a serious influence
on human life and property if they are used improperly.
Items to Check After Unpacking
Check the following items after removing the product from the package:
S Has the correct product been delivered (i.e., the correct model number and specifications)?
S Has the product been damaged in shipping?
The product is provided with this manual. No connectors or mounting screws are provided.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
