Omron OMNUC U Series - Page 37

2-19
j Connecting SYSMAC C-series Position Control Units Using Relay
Units
Position Control Unit for C200H
Programmable Controllers
C200H-NC112 (1 axis)
Connector Cable for
Position Control Unit
(for C200H-NC112)
XW2Z-050J-A4 (0.5 m)
XW2Z-100J-A4 (1 m)
Position Control Unit for C200H
Programmable Controllers
C200H-NC211 (2 axes)
Position Control Unit for C500
Programmable Controllers
C500-NC113 (1 axis)
C500-NC211 (2 axes)
Connector Cable for
Position Control Unit
(for C200H-NC21
1 and
C500-NC113/211)
XW2Z-050J-A5 (0.5 m)
XW2Z-100J-A5 (1 m)
Relay Unit
(for C200H-NC112)
XW2B-20J6-1B
Relay Unit
(for C200H-NC211)
XW2B-40J6-2B
Connector Cable for
Servo Driver
XW2Z-100J-B5 (1 m)
XW2Z-200J-B5 (2 m)
Two cables are required
when used in combination
with C200H-NC211 or
C500-NC211 (2 axes).
OMNUC U-series UE model
AC Servo Driver
Encoder Cable
R88A-CRUC
Power Cable
R88A-CAUS
R88A-CAUB
OMNUC U-series UE model
AC Servomotor
Note 1. Refer to Chapter 6 for Relay
Unit
terminal block connection exam-
ples.
Note 2. Relay
Units for CQM1-CPU43-V1
and CQM1H-PLB21 (with pulse
I/O function) are also available.
Note Refer to the catalog for XW2B Servo Relay Units for more details.
System Design and Installation
Chapter 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com