BN50S / BN75S / BN100S / BN150S / BN220S / BN300S
6
43
■
Procedure for recycling the battery
<BN50S/BN75S>
1.
Use a screwdriver to loosen (turn counter-clockwise) the 2 screws at the top of the front panel of
the unit, until they turn freely. (The screws cannot be removed from the front panel.)
➀
Pull the top of the front panel open and remove it taking care of the hook at the bottom.
➁
2.
Disconnect the battery connector by holding it.
➀
Battery recycling
The unit uses lead acid batteries, which are a valuable recyclable resource. Please recycle.
For information on recycling, please contact our Electronic Systems & Equipments repair center.
Pb
1
Loosen the 4 screws.
2
Battery connector
1
1
Disconnect by holding here.
To Next Page
Loading...
