80
xä-ÉÇx- £ää-É£xä- ÓÓä-ÉÎää-
<BN100S/150S><BN50S/75S> <BN220S/300S>
An SNMP/Web card can be loaded into the card slot on the back of the unit. Remove the cover of the
slot for “signal card addition” from the rear of the unit, and plug the SNMP/Web card in its place.
•
SNMP/Web card (model number: SC20G), sold separately
(1) Remove the two screws and remove the signal card expansion slot cover.
9-1
Adding an SNMP/Web card
Using an SNMP/Web card
99
(2) Carefully insert the SNMP/Web card (model number: SC20G), and securely tighten the 2 screws.
* Replace with BU50SW/BU75SW/BU100SW/BU150SW/BU1002SW/BU3002SW brackets.
To Next Page
Loading...
