Omron POWLI BN50S - When Performing Auto-Save Functions Using the Standard UPS Service in Windows Server 2003;XP;2000;NT

7.Using the UPS monitoring software
66
When using the product with the optional SC07 contact signal card and BUC26 cable, the OS stan-
dard UPS service in Windows Server 2003/XP/2000/NT can be used. When there is a power failure,
the computer can be shut down.
* When using the unit in the SC05 compatible mode, use an optional BUC10 cable.
See also
” 8 Using a contact signal”
➛
See page 72
1. Connect the UPS to a computer.
Contact singal card (SC07), sold separately
Connection cable (BUC26), sold separately
* Only 1 computer can be connected to the UPS
7-3 When performing auto-save functions using
the standard UPS service in Windows Server
2003/XP/2000/NT
BN100S/BN150S
BN220S/BN300S
Connect to
RS-232C
port on PC
BUC26
cable
RS-232C端子RS-232C端子
に接続するに接続する
コネクタコネクタ
Connect to
RS-232C
terminal
Connector
Connector
Connect to I/O conn-
-ector on contact
signal card
コネクタコネクタ
Connect to
RS-232C
port on PC
BUC26
cable
Connect to
RS-232C
terminal
Connect to I/O conn-
-ector on contact
signal card
Connector
Connector
Connect to
RS-232C
port on PC
BUC26
cable
RS-232C端子RS-232C端子
に接続するに接続する
コネクタコネクタ
Connect to I/O conn-
-ector on contact
signal card
Connector
Connect to
RS-232C
terminal
Connector
BN50S/BN75S