To Next PageTo Next Page
Need help?Do you have a question about the Omron POWLI and is the answer not in the manual?
Describes UPS features, usage restrictions, and disclaimers.
Explains symbols, battery voltage, temperature rating, and environment.
Outlines procedures for installation, connection, operation, and maintenance.
General warnings and cautions for safe operation.
Specific cautions for installation and connection.
Further cautions for installation and connection.
Precautions for operating the UPS.
Cautions for maintenance and battery replacement.
Further battery replacement cautions and recycling info.
Notes on moving, charging, storing, and operational restrictions.
Notes on output modes, accidents, and operation explanations.
Instructions for unpacking and verifying package contents.
Identifies front panel parts and display details.
Identifies rear panel components for both models.
Table explaining symbols and their meanings.
Safety precautions for UPS installation and connection.
Further cautions for installation and connection.
More cautions and notes for installation.
Illustrates correct and incorrect installation positions.
Steps for vertical and horizontal installation of BU3002SWG.
Cautions, examples, and group control for equipment connection.
Details on connecting devices to BU1002SWG power output.
Procedures for connecting to output receptacles and terminal blocks.
Connecting to PC and final connection cautions.
Safety precautions related to grounding.
Cautions, examples, and group control for BU3002SWG.
Cautions for terminal block connection and ESD.
Connecting to PC and final connection cautions.
Safety precautions related to grounding.
Steps to check UPS operation after setup.
Checking indicators and beeps in Battery Mode.
Instructions for battery charging and backup time measurement.
Safety precautions for operating the UPS.
Notes on stopping power, accidents, and operation modes.
Steps to start the UPS and its operation.
How UPS operates during power failure and stop procedures.
How capacity and battery level are displayed.
Guide to interpreting beeps and displays in various conditions.
Guide to interpreting displays and beeps during equipment failure.
How to suspend beeps and perform self-diagnosis.
Description of auto battery test and function settings.
List of setting switches and beeper control.
Settings for battery test and auto startup mode.
Examples of BS signal usage for UPS control.
How to configure BS signal range settings.
Details on configurable UPS operation modes.
Examples and precautions for signal I/O circuits.
How to access and change UPS settings.
Detailed settings for operation modes.
Procedure for measuring backup time.
Safety cautions for backup time measurement.
Graph and table for estimating backup time.
Safety precautions for maintenance.
Battery lifespan, checking methods, and frequency guidelines.
Cautions for replacing the battery.
Battery replacement cautions and recycling steps.
Steps for removing the battery pack.
Steps for inserting new battery and securing connector.
Attaching front panel and recycling steps for BU3002SWG.
Steps for removing battery pack for BU3002SWG.
Steps for inserting new batteries and connecting for BU3002SWG.
Procedures after replacement during operation or stopped state.
Instructions for cleaning the UPS and connectors.
Information on UPS monitoring software and compatibility table.
Caution related to CE marking compliance.
Connecting UPS and details on PowerAct Pro software.
Installing software for Windows and Mac.
Explanation of scheduled operation, auto restart, and OS shutdown.
Connecting UPS and installing service driver for auto-save.
Introduction to contact signals and types.
Details on signal inputs and UPS stop signal.
Remote ON/OFF signals and contact card settings.
Backup signal output and jumper settings.
Contact signal connector details and installation.
Details on connectors, ratings, and circuit examples for signals.
Remote ON/OFF circuit and precautions for contact signals.
Introduction, parts, and installation of the SC08G card.
Cautions for liquid contact, wiring, and insertion.
Details on various signal output configurations.
Details on signal inputs and contact card settings.
Settings for backup signal, voltage range, and remote ON/OFF.
Details on setting switches, connectors, and ratings for signal I/O.
Circuit diagrams for output, input, and remote ON/OFF signals.
Usage examples and precautions for signal circuits.
Instructions for adding the SNMP/Web card.
Features and description of the SNMP/Web card.
Details on network, OS compatibility, and compliance.
Troubleshooting steps for common UPS issues.
Comprehensive technical specifications including input, output, battery, and environment.
Dimensional drawings for BU1002SWG and BU3002SWG.
Circuit diagram and list of related products.
General
