Omron POWLI User Manual

10
2. Installation and Connection
This section describes how to install the UPS. Do not use this unit in any position other than the “correct
positions” indicated in the illustration below.
Note
Before installing this device, make a record of the serial number of this device.
The serial number is required when contacting us about the device.
The serial number is written in the label on the unit's top side.
BU1002SWG
BU1002SWG
IncorrectPositions
STATUS
POWER ON/OFF
BEEP STOP/TEST
BYPASS
BATTERY
WEAK
OUTPUT
LOAD/
BATTERY
STATUS
POWER ON/OFF
BEEP STOP/TEST
BYPASS
BATTERY
WEAK
OUTPUT
LOAD/ BATTERY
BU1002SWG
BU1002SWG
STATUS
POWER ON/OFF
BEEP STOP/TEST
BYPASS
BATTERY
WEAK
OUTPUT
LOAD/
BATTERY
STATUS
POWER ON/OFF
BEEP STOP/TEST
BYPASS
BATTERY
WEAK
OUTPUT
LOAD/ BATTERY
CorrectPositions
Be careful not to get your fingers caught
when arranging the unit.
(Air vents are facing upward)
< BU1002SWG >
* The feet can also be anchored to the oor with screws if you use BUP100SG mounting brackets (sold
separately).
Refer to the BUP100SG instruction manual for more details.
2-2
Installation and connection

Omron POWLI Specifications

General

Brand	Omron
Model	POWLI
Category	UPS
Language	English