<BU3002SWG>
●
The UPS has been charged prior to shipment. However, the backup time becomes shorter when
using it for the rst time due to spontaneous discharge.
We recommend charging the UPS before using it.
When the AC input plug is connected to a wall outlet (commercial power), the battery automati-
cally starts charging, taking up to 8 hours to complete (24 hours when an additional battery unit
is connected).
●
You can perform "2-4 Checking the operation" on page 22 also before charging the battery.
Input plug (CEE 7/7)
(Front view)
When one wire is used to ground the AC input power
supply, make sure to use this unit's N terminal (phase)
side as the ground.
●
A misconnection may result in malfunction.
Caution
220 to 240 VAC
3P receptacle
To Next Page
Loading...
Need help?
General
