6.Maintenance and Inspection
48
4.
Hold the pullout label at the bottom of the battery pack and remove the battery pack.
Do not hold the connector or cable of the battery pack.
Use the red tape on the top of the battery pack, which is 10 cm from the inner edge of the battery,
to gauge how much further you need to pull the battery to remove it. Hold the battery securely
with both hands so as not to drop it.
Red tape
Battery connector
Pullout label
(Pull this to remove.)
Battery pack
3.
Turn the 2 screws that fi x the plate cover counter-clockwise to remove them.
➀
Pull the plate cover towards you
➁
and lift it up to remove it.
➂
1
Remove the 2 screws.
②
③
To Next Page
Loading...
