12
3.Using the Unit
Note: Unless the wrist cuff is wrapped securely around the
wrist, it may not be possible to take correct
measurements.
Smooth the cuff with your fingers
to ensure that it fits snugly around
the wrist.
Notes:
• If the fastener is not wrapped
securely around your wrist, the
cuff may slip during
measurement.
• If you have a slender wrist, the
cuff may feel slightly loose.
However, this will not affect
measurement results and you
should not force the cuff to fit.
• The remaining part of the wrist
cuff can be conveniently folded
back out of the way.
• If the remaining part of the cuff
is difficult to fold back,
measurement results will not be
effected.
Taking a reading on the right wrist
Measurements can also be made
on the right wrist.
Fit the unit on the right wrist as
shown.
HEM6021-E.book Page 12 Friday, July 22, 2005 11:08 AM
To Next Page
Need help?
General
