23
ENEN
6. Maintenance and Storage
To protect your unit from damage, please avoid the following:
• Subjecting your unit to extreme temperatures, humidity, or
direct sunlight.
• Washing the cuff or exposing the cuff or unit to water.
• Disassembling the unit.
• Subjecting the unit to strong shocks or vibrations. Dropping the
Unit.
• Cleaning the unit with volatile liquids. THE UNIT SHOULD BE
CLEANED WITH A SOFT, DRY CLOTH.
Use a soft, moistened cloth and soap to clean the cuff.
Keep the unit in its storage case when not in use.
Fold the cuff into the storage case.
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct
sunlight, dust or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at
an angle.
• Locations exposed to chemicals or corrosive vapours.
HEM6021-E.book Page 23 Friday, July 22, 2005 11:08 AM
To Next Page
Loading...
Need help?
General
