4 Configuration and Wiring
4 - 10
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
Take measures to protect the motor shaft from corrosion. The motor shaft is coated with anti-corrosion
oil when it is shipped, but you should remove anti-corrosion oil when you connect the components that
apply load to the shaft.
Wire cables not to contact with Servomotors, which have high temperature.
Other Precautions
Caution
Do not repair the Servo Drive by disassembling it.
Electric shock or injury may result.
Do not apply a commercial power supply directly to
the motor.
Fire may result.
To Next Page
Loading...
