12 Troubleshooting
12 - 12
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
*2. The deceleration operation shows the operation (Operation A or Operation B) that is used when Fault reac-
tion option code (605E hex) is set to -4 to -7.
*3. This error can occur in the unit version 1.2 only.
*4. This error can occur in the unit version 1.3 or later.
*5. This error can occur in the unit version 1.1 or later.
*6. “---” is specified for the unit version 1.0.
To Next Page
Loading...
Need help?
General
