1
Introduction
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User’s Manual (I586)
Introduction
Thank you for purchasing a 1S-series Servo Drive. This User’s Manual describes the installation and
wiring methods of the 1S-series Servo Drives and parameter setting method which is required for the
operation, as well as troubleshooting and inspection methods.
This User’s Manual is intended for the following personnel, who must also have electrical knowledge
(certified electricians or individuals who have equivalent knowledge).
• Personnel in charge of introducing the FA equipment
• Personnel in charge of designing the FA systems
• Personnel in charge of installing and connecting the FA equipment
• Personnel in charge of managing the FA systems and facilities
This User’s Manual contains information you need to know to correctly use the 1S-series Servo Drives
and peripheral equipment.
Before using the Servo Drive, read this User’s Manual and gain a full understanding of the information
provided herein.
After you finished reading this User’s Manual, keep it in a convenient place so that it can be referenced
at any time.
Make sure this User’s Manual is delivered to the end user.
Intended Audience
Notice
To Next Page
Loading...
