Omron R88D-KT Series User Manual

9-8
9-4 Setting the Mode
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
Monitor Mode
 The motor rotation speed will be displayed the first time the power supply is turned ON after
purchase. To change the initial display when the power supply is turned ON, change the setting
for the Default Display (Pn528). For details, refer to Pn528 "Default Display" (P.8-57).
Total command pulses
Position error (encoder unit)
Total external encoder
feedback pulses
Control mode
I/O signal status
Analog input value
Alarm factor, history
Warning number
Regeneration resistance
load ratio
Overload load ratio
Inertia ratio
Reason for no rotation
Absolute external encoder position
Monitor for the count of encoder
communications errors
Communication axis
number display
I/O signal change count display
Absolute encoder data
External encoder error
(external encoder unit)
Hybrid error
P-N voltage
Soft version
Drive serial number
Motor serial number
Automatic motor
recognition function
Accumulative operation time
Drive temperature,
encoder temperature
Safety status monitor
Position command error
Motor speed
Position command speed
Speed control command
Torque command
Total encoder
pulses
When is pressed, the display position will move
in the direction of the arrow.
When is pressed, it will move in the opposite direction.

Omron R88D-KT Series Specifications

General

Brand	Omron
Model	R88D-KT Series
Category	Servo Drives
Language	English