Omron R88D-KT Series User Manual

9-9
9-4 Setting the Mode
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
Position Command Error
Motor Rotation Speed
 Displays the motor rotation speed (unit: r/min).
 Rotation speeds in reverse operation are displayed with "-".
Position Command Speed
 Displays the position command speed (unit: r/min).
Speed Control Command
 Displays the speed control command (unit: r/min).
Torque Command
 Displays the percentage of drive torque command.
 When the rated torque output for the drive is used, "100%" is displayed.
 Torque outputs in reverse operation are displayed with "-".
Lower (L)
Higher (H)
Position command error [command unit]
Press to switch between Lower (L) and Higher (H).

Omron R88D-KT Series Specifications

General

Brand	Omron
Model	R88D-KT Series
Category	Servo Drives
Language	English