Omron R88D-KT20F - Page 535

9-30
9-4 Setting the Mode
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
2. Setting the parameter number
3. Displaying parameter set values
4. Changing the parameter set value
5. Returning to Parameter Setting Mode
6. Saving changed set values
Key
operation
Display example Explanation
Use the keys to set to Pn535.
· Press to move "." to the left and change the digit to be set.
· Press to increase the value of the digit with ".".
· Press to decrease the value of the digit with ".".
Key
operation
Display example Explanation
Press the key to display the set value.
Key
operation
Display example Explanation
Use the keys to change the value.
· Press to move "." to the left and change the digit to be set.
· Press to increase the value of the digit with ".".
· Press to decrease the value of the digit with ".".
Press the key to save the new set value.
· To cancel the change, instead of pressing , press to
return to the display in procedure 2.
Key
operation
Display example Explanation
Press the key to return to Parameter Setting Mode.
Key
operation
Display example Explanation
Press the key to display Parameter Write Mode.
Press the key to enter Parameter Write Mode.