14
5. RESTORING THE SCALE TO THE DEFAULT SETTINGS
To delete all information stored in the scale, follow the instructions below. Make sure that the
scale is turned off.
1. Press the [Bluetooth] button for more than 2 seconds.
The display flashes as shown on the right.
2. Press the [Bluetooth] button again for more than 5 seconds.
The display flashes as shown on the right and the
“ ” symbol stops flashing.
3. Press the [SET] button.
When the display stops flashing, the scale is restored to the
default settings.
Note:
• The scale will automatically turn off after 10 seconds.
• Restoring to the default setting of the scale does not delete the information in the app.
To Next Page
Loading...
Need help?
General
