Omron STC-HD203 Series - Page 65

No. 13S054-10
STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS
Product Specifications and Users Guide
65/78
5) SHARPNESS
Sets the Sharpness (Edge Enhancement) of the image (Default: 0).
a) H
Sets the horizontal sharpness.
Setting range: 0 (Soft) to 15 (Strong)
Default: 0
b) V
Sets the vertical sharpness.
Setting range: 0 (Soft) to 15 (Strong)
Default: 0
b) COR
The noise level also emphasizes when using the sharpness function.
The SN ratio deteriorate for the other than the edge parts is prevented by cutting the signal level
that smaller than this setting.
The image becomes the soft image if this setting sets too large.
Setting range: 0 to 63
Default: 3