EasyManuals Logo

Omron SYSMAC CJ1W-SCU21-V1 User Manual

Omron SYSMAC CJ1W-SCU21-V1
781 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #642 background imageLoading...
Page #642 background image
613
K3T
@
Intelligent Signal Processor Protocol Appendix L
Read Set Value L with Bank (Continuous Units)
(Sequence No. 325 (Hex 0145))
This sequence reads set value L of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value LL with Bank (Continuous Units)
(Sequence No. 326 (Hex 0146))
This sequence reads set value LL of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O5 with Bank (Continuous Units)
(Sequence No. 327 (Hex 0147))
This sequence reads set value O5 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O4 with Bank (Continuous Units)
(Sequence No. 328 (Hex 0148))
This sequence reads set value O4 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O3 with Bank (Continuous Units)
(Sequence No. 329 (Hex 0149))
This sequence reads set value O3 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O2 with Bank (Continuous Units)
(Sequence No. 330 (Hex 014A))
This sequence reads set value O2 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O1 with Bank (Continuous Units)
(Sequence No. 331 (Hex 014B))
This sequence reads set value O1 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Holding Data (Sequence No. 332 (Hex 014C))
Reads the peak/bottom data (maximum, minimum) and stores the results in the specified words.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron SYSMAC CJ1W-SCU21-V1 and is the answer not in the manual?

Omron SYSMAC CJ1W-SCU21-V1 Specifications

General IconGeneral
BrandOmron
ModelSYSMAC CJ1W-SCU21-V1
CategoryNetwork Hardware
LanguageEnglish

Related product manuals