Omron SYSMAC CS Series Operator's Manual

Debug Console Window Section 3-9
87
[Command log] | [Stop]
Exit the Command Log. Can not be selected if the Command Log has not
been started.
[Command log] | [Configuration]
Set the Command log. The Command log saves the CX-Programmer com-
mands with FINS commands.
· Log file name Input the file name for saving the Command Log. If the
existing file is specified, the log data will be appended
to the bottom of the file.
· Browse The Log file can be selected by browsing.
· Read Read the Command Log settings from the file.
· Save Save the Command Log settings to the file.
· Clear All Clear the filter check for all of the registered items of
the FINS address filter and the FINS command filter.
· Set All Select the filter check for all of the registered items of
the FINS address filter and the FINS command filter.
· OK Save the present settings and exit the window.
· Cancel Discard the present settings and exit the window.
FINS Address Filter
Registration List
FINS Address Filter
Filter Check
FINS Command Filter
Registration List
FINS Command Filter
Filter Check
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr

Omron SYSMAC CS Series Specifications

General

Brand	Omron
Model	SYSMAC CS Series
Category	Controller
Language	English