Omron SYSMAC NX-CIF105 - Page 214

Appendices
A - 34
NX-series Communications Interface Units User’s Manual (W540)
CmdStage := INT#10;//Transition (to error end)
END_IF;
END_IF;
//Set the Input SID Response.
N1_Ch1_Input_SID_Response := N1_Ch1_Input_SID;
END_IF;
5: //Confirm completion of clearing Output SID.
IF (ExpectedOutputSIDResponse = N1_Ch1_Output_SID_Response) THEN
//Normal end
CmdStage := INT#0;//Transition (return to initial status)
END_IF;
10: //Error end
;
END_CASE;