11
When using the unit for the fi rst time or after not using it for a long period of time, clean and
disinfect the medication container, mesh, mask adapter, mouthpiece and mask. Refer to page 16 for
instructions.
1. Insert batteries or use the (optional) AC adapter, see page 9 and 10.
2. Remove the medication container from the main unit. To do so,
push on the release buttons on both sides. This will disengage
the latch mechanism.
Medication container
release Buttons
Lift up the Mesh Cap
by placing your thumb
under the rim.
3. Remove the mesh cap by
placing your thumb under the
rim, gently pushing up, tilt the
cap back until perpendicular
and lift straight up.
Hold the medication bottle as
illustrated.
Do not touch the mesh!
How to assemble the unit and fi ll the medication container
To Next Page
Loading...
