Omron ZFX-C Command Reference

Example of Usage
58
ZFX-C Serial Communication Command Reference
3 Set the communication conditions for the ZFX-C.
Set [System]-[Comm] to match the above settings.
For details on how to set the communication specifications, refer to the User's Manual.
4 Switch the ZFX-C to the RUN mode.
2-2 Select the Settings tab, and then [ASCII Setup].
2-3 Mark the following checkboxes, and click OK to complete the setting.
ADJADJ
MENUMENU RUNRUN
Mode switch

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English