Need help?Do you have a question about the Omron ZW-7000 Series and is the answer not in the manual?
General| Brand | Omron |
|---|---|
| Model | ZW-7000 Series |
| Category | Accessories |
| Language | English |
Overview of the ZW-7000/5000 series displacement sensors, their components, and function.
Describes the fundamental operational steps for the ZW-7000/5000 Series.
Guide to setting up the Sensor Head, Controller, connecting to PC, and monitoring results.
Details on connecting the sensor to various systems like EtherCAT, EtherNet/IP, and RS-232C.
Description of the names and functions of the Sensor Head, Calibration ROM, and Sensor Controller.
Procedures for installing the Sensor Head and Sensor Controller, including mounting and precautions.
Detailed information on wiring connections for the 32-pole extension connector and terminal blocks.
Information on installing the PC tool for setting up displacement sensors.
Steps to create a new project, connect to the sensor, and add sensors to a project.
Overview of the Sysmac Studio interface, including menu bar, toolbar, Multi View Explore, and edit pane.
Instructions on how to save, export, and import project data for configuration management.
Explains how to set the measurement start timing and internal processing of the Sensor Controller.
Details on switching between RUN and FUNC modes for operation and settings.
How to display measurement values and received light waveforms on the software interface.
Instructions on how to perform zero reset to set the measured value to zero.
Guide to displaying measured values as graphs and setting sampling conditions.
How to export sampled data as a CSV file for analysis and record-keeping.
Instructions for importing previously exported measurement data and displaying it as a graph.
Methods for logging measurement data to the Sensor Controller's internal memory.
Explanation of multi-task and bank data features for managing multiple measurement settings.
Information on operating the ZW-7000 Series using the physical keys on the Sensor Controller.
Configuration of sensing parameters like measurement cycle, material, noise cut, smoothing, and area.
How to configure measurement items such as height, thickness, and calculations.
Configuration for output settings including scaling, filters, hold, and trigger conditions.
Procedures for setting HIGH and LOW threshold values for judgment.
Configuration of input/output settings, including non-measurement behavior and clamp values.
System settings such as key lock, display format, initialization, and calibration.
Instructions for saving, copying, initializing, clearing, and changing bank/system settings.
How to view sensor controller and sensor head information like model, version, and serial number.
Procedure to save the light reception waveform data as a record of measurement state.
Guide to printing bank data and system settings in various formats.
How to control input signals (LIGHT-OFF, TIMING, RESET, ZERO) using the PC tool.
Information on selecting data for external output via analog or digital routes.
Enables users to perform settings offline without connecting an actual sensor.
Steps to create and configure a project in offline mode.
Methods for switching between online and offline connection states with the sensor.
Guidance on performing linked simulations and debugging sensor programs offline.
Hierarchical overview of settings and functions accessible via the Sensor Controller's menu.
Explanation of themes and symbols displayed on the main and sub-displays in RUN/FUNC modes.
Instructions on how to switch between RUN and FUNC modes using keys.
Details on switching measurement displays and understanding sub-display information.
Procedures for setting measurement cycle, material, direction, exposure time, and measurement area.
Configuration for measuring height, thickness, and performing calculations.
Settings for filters, hold, triggers, zero reset, and scaling for output.
Procedures for switching banks, changing bank mode, copying, initializing, and clearing bank settings.
Methods for setting threshold values using teaching or direct input.
System configuration including key lock, display digits, initialization, and synchronous modes.
Reference to manual for details on connecting parallel I/O.
Reference to manual for details on connecting via EtherCAT.
Reference to manual for details on connecting via EtherNet/IP.
Reference to manual for details on connecting via no-protocol communications.
Reference to manual for displayed or output error messages in each communication.
Guidance on temporarily remedying hardware-related troubles, checking items before repair.
Detailed specifications and external dimensions for Sensor Head, Controller, and accessories.
Procedure for updating the firmware using Sysmac Studio Measurement Sensor Edition.
To Next Page
