Displaying measured values in graphs
100
ZW-7000/5000
User's Manual
Starting and ending sampling before and after the trigger condition is met
You can adjust how long to start or end the sampling before or after the condition for starting and ending
sampling is met.
• Sampling start position A
To start sampling before the time when the trigger start condition is met, input a negative value for the delay
tim
e.
• Sa
mpling start position B
To end sampling after the time when the trigger end condition is met, input a positive value for the delay time.
1
Input the delay time.
Adjusting the scale of the axis in a graph automatically according to the measurement values
For the graph display of measurement values, you can adjust the scale of the vertical axis (distance) in a graph
automatically according to the maximum and minimum values of measurement values.
2
Click the Start icon ( ) to start the sampling.
When the sampling starts, the sampled data is displayed in the graph.
Item Setting item Range Description
Trigger condition Delay time -9999 to 9999 ms The sampling starts or ends at the time shifted by the set
time from when the trigger condition is met.
1
Turn ON the [Adjust the scale of the axis automatically]
checkbox.
To fix the scale of the vertical axis, turn OFF the checkbox.
Measurement data satisfied the start condition trigger
Measurement value
Sampling interval
Sampling start position A
Sampling start position B
To Next Page
Loading...
