Omron ZW-7000 Series - Attaching the Strap to the Calibration ROM

Installation
54
ZW-7000/5000
User's Manual
Installing on bottom
The following describes how to attach the Sensor Controller on its bottom.
Attaching the strap to the Calibration ROM
2 Attach the calibration ROM to the Sensor Head.
1 Drill four installation holes on the base.
For the location installation holes, see the external
dimensions.
9-1 Specifications and External Dimensions
p.260
2 Tighten four M4 screws to fix the Sensor Controller
on the base.
Tightening torque: 1.2 N • m
Sensor Controller thread depth: 6 mm
1 Attach the supplied strap to the calibration ROM.
Important
M4 screw × 4
Calibration ROM
Strap
l ZW-7000 Series
l ZW-5000 Series