Saving The Settings
168
ZW-7000/5000
User's Manual
Clearing the Bank Settings
Select a bank and initialize its settings.
Setting the Bank Mode
Select the bank contents to be obtained from the settings or judgment value.
All bank data will be initialized when the bank mode is switched.
Multi View Explore : [System] (double-click)
→ Edit pane : [Sensor Settings] icon ( )
1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.90
2
Select the bank data.
Select the bank data from the Multi View
Explore, and
select [Initialize] from the right-click
menu.
The bank settings can also be cleared by the operating keys on the Sensor Controller.
Initializing Settings p.245
Item Setting item Setting value Description
Sensor settings Bank mode Normal (default
value)
Sensing setting, measurement setting and I/O setting that are set in the FUNC
mode are regarded as bank data. The number of banks is up to eight.
Judgment
value
Only the threshold value under the measurement set
ting is regarded as bank
data. Other values are the same for all banks. The number of banks increases
up to 32.
1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.90
To Next Page
Loading...
Need help?
General
