Setting the Banks
236
ZW-7000/5000
User's Manual
Copying the Bank Settings
Copy the selected bank setting to another bank.
Copying the Bank/System Settings p.166
As an example, here is an explanation of the proced
ure fo
r copying the BANK1 setting to BANK4.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds to enter the FUNC
mode.
2 Press the / key to select BANK, then press the key.
3 Press the / keys to select “BK.COPY” and press the
key.
4 Select “BANK1” as the bank setting to be copied.
“FROM” is displayed on the main display and the current setting
value is
displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
Select “BANK1” and press the
key.
5 Select “BANK4” as the target to copy the bank setting.
“TO” is displayed on the main display and the current setting value is
displaye
d on the sub-display.
Press the / keys to enter the editing mode, and the sub-
display blinks.
Select “BANK4” and press the
key.
6 Press the key for two seconds to enter the RUN mode.
To Next Page
Loading...
