Bank switching
112
ZW-7000/5000
User's Manual
Switching Banks
Switches banks.
You can also switch the bank by entering the non-procedural command.
“5-1 Connecting by No-protocol Communications” described in Displacement Sensor ZW-7000 series
Confocal Fiber Type Displacement Sensor User’s Manual for Communications Settings (Z363)
1
Double click to open the bank group in the
Multi View Explore.
2
Select the bank data to switch and double
click or right click it to select the Edit menu.
The bank in the Bank data edit pane that is
a
cti
ve on the Edit pane becomes the current
bank.
Switching Banks can also be set by the operating keys on the Sensor Controller.
Switching Banks p.234
To Next Page
Loading...
