Basic Operations for Displaying Measurement Results
38
ZW-7000/5000
User's Manual
Monitoring the Measurement Results
After the completion of sensor head calibration, check that measurement is performed correctly.
Multi View Explore : [Device Group] | [(Sensor Name)] (right-click)
5 Convenient Functions p.171
8 Troubleshooting p.253
1
Select [Sensing Monitor].
Open the sensing monitor window.
If the displayed measurement results are incor-
rect, refer to Chapter 8 Troubleshooting.
If the resolution of PC is low, the light reception wave might not be displayed. In this case, close displayed item, mea-
surement result, LED light and I/O input.
To Next Page
Loading...
